A/C Components.

List your parts needs here! Please include your location and contact information.
Post Reply
********
Registered Member
Posts: 227
Joined: 29 Aug 2019, 17:43

A/C Components.

#1

Post by ******** »

I am looking for the idlers and stamped compressor bracket. I need the under dash items as well. Evaporator housing, blower housing and duct both heater and vent. Also the vacuum reservoir.
-Keith

User avatar
C7XR7
Registered Member
Posts: 285
Joined: 25 Dec 2010, 01:49
Location: Mesa Arizona
Contact:

Re: A/C Components.

#2

Post by C7XR7 »

You don't mention for what car. I do have a few of those parts HERE

********
Registered Member
Posts: 227
Joined: 29 Aug 2019, 17:43

Re: A/C Components.

#3

Post by ******** »

My 67 Mustang/ Shelby with an FE. I need both idlers and a 7AC power steering pulley. I need all of the under dash except the controls and vents.

CATHOUSE
Registered Member
Posts: 1315
Joined: 20 Aug 2013, 08:24
Location: Elizabethtown PA

Re: A/C Components.

#4

Post by CATHOUSE »

Did you ever get what you needed? I have some of the under dash parts.

Randy Goodling
CCOA #95

sfhess
Registered Member
Posts: 536
Joined: 01 Nov 2011, 13:38

Re: A/C Components.

#5

Post by sfhess »

I have a bunch of vacuum actuators and ductwork.

cobrasc427
Registered Member
Posts: 205
Joined: 13 Jan 2012, 14:05

Re: A/C Components.

#6

Post by cobrasc427 »

I have the A/C Mounting Bracket, I have the A/C Stamped air compressor bracket, with both idler arms, all items have been restored already and look beautiful, let me know

User avatar
C7XR7
Registered Member
Posts: 285
Joined: 25 Dec 2010, 01:49
Location: Mesa Arizona
Contact:

Re: A/C Components.

#7

Post by C7XR7 »

Have the ac/heat box under the dash. Thought I listed it but guess not. Few other parts here.
http://www.xcs.net/forsale/uth.html

********
Registered Member
Posts: 227
Joined: 29 Aug 2019, 17:43

Re: A/C Components.

#8

Post by ******** »

You did a very nice job of layout and illustrating. I am down to a few small things. I don't know how much different an FE compressor clutch is from a small block. Based on measurement of one it looks like the belt groove is in the same place but it was 6 3/4 on the clutch pulley. I have quite a few parts that have to go to be chrome plated as well.
-Keith

Post Reply